Ryder Cup Match Configuration
Configure match formats, handicap settings, and round structures for your Ryder Cup event. This guide covers the match configuration options available in the Ryder Cup round wizard and the round edit screens.
Accessing Match Configuration
- Open your Ryder Cup event
- Click on a specific round
- Click Edit Matches & Tees from the round's action menu
Round Configuration
Each round is created in the Create Round wizard. The wizard collects:
- Round name and date/time
- Course and tee
- Players per side (1 for Singles, up to 4 for team formats — capped by the smaller of the two team rosters)
- Game format
- Handicap allowance and other scoring settings
Matches are added on the wizard's matches step. You set a Start Plan first, then build matches one at a time; each new match takes the next open slot from the plan, so you never pick holes or tee times per match.
Start Plan
- Start type: Shotgun or Tee Times.
- First hole (shotgun) or Starting hole (tee times): any hole 1–18 on an 18-hole round. On a 9-hole round the hole you pick decides which nine the round plays, unless the tee set only has nine holes.
- Hole order (shotgun): Standard (1, 2, 3…) sends groups off in ascending order from the first hole; Reverse (1, 18, 17…) runs backwards from it.
- Interval (minutes) (tee times): minutes between groups. Every match goes off the starting hole, stepped by this interval from the round's start time.
- Matches this round: how many matches you plan to add. The plan uses it to tell you when the shotgun is short of slots.
- Holes in use (shotgun): a grid of the holes in play. Click a hole to double it (an A group and a B group start there), click again to skip it. The quick buttons double par 5s and 4s to fit your match count, pack the matches onto the fewest holes from the first hole, or restrict an 18-hole round to the front or back nine.
The plan is saved on the round as its shotgun / tee-time setting and hole order.
Building matches
Each side of the New match card has one search box per player. Type a name to pick a player, or click a player's chip below the boxes to drop them into the next open spot. Players already placed in another match on this round show greyed with the reason. When the last spot is filled the match is added to the list below with its hole and tee time, and the card clears for the next match.
In the match list, Edit reopens a match's players (the match keeps its hole and tee time; click Save match to apply) and Remove takes the match out and frees its slot for the next match you add.
The same builder runs from Add Matches + in Edit Matches & Tees, where the round's saved matches already count as occupied, so a match added later lands on the next free slot.
Rounds appear in the order they are created. Reordering existing rounds is not currently a feature.
Game Formats
Ryder Cup rounds use the same game formats as the rest of Live Tourney. The formats commonly used in Ryder Cup play are:
- Singles — 1 player per side
- Best Ball — 2 players per side, each plays their own ball, best score counts
- Alternate Shot — 2 players per side share one ball, alternating shots
- Scramble and Chapman — also available for two-player teams
- 1 Gross 1 Net — 2, 3, or 4 players per side, each plays their own ball; the side's hole score is its best gross ball plus the best net ball from a different player
Set Players Per Team to 3 or 4 (when each team has enough players) and the format list expands to the larger team formats — for example Scramble, 1-of-4, 2-of-4, 3-of-4, and 4-of-4 — so you can run a 3v3 or 4v4 round such as a 4v4 Scramble. The available player counts are capped at 4 and by the smaller of the two team rosters.
The full list of supported formats lives in GameFormat and includes Stableford variants of each. Choose the format that matches how the round will actually be played.
Best Ball, Alternate Shot and Singles in one round (6-6-6)
A two-player round can play three formats as one match on one card by choosing 6-6-6 as the game format and picking a format for each six-hole segment. Singles is offered as a segment format on two-player match play rounds, so a round can run Best Ball on holes 1-6, Alternate Shot on 7-12 and Singles on 13-18 without creating three rounds and three scorecard codes.
In the Singles segment each player plays the opponent listed in the same spot in the matchup: the first player on each side meet, and the second player on each side meet. Strokes in that segment are off the low player within each pairing. Both singles matches count on their own:
- A singles hole can swing the match by two. The match status counts it that way, and the hole circle on the match card splits in two, one half per singles match.
- With points per 6 holes, the Singles segment awards two results, one per pairing, each worth the segment points. Best Ball, Alternate Shot, Singles A and Singles B are each a point in a one-point-per-segment setup.
- With points per hole, each pairing's result on a singles hole earns the full hole points.
Because the pairing follows the order players are listed in the matchup, reorder a side in the matchup editor before scorecards are built if the wrong players would meet. Refreshing or updating handicaps keeps the pairing.
Reusing Pairings Across Rounds
When adding a new round to a Ryder Cup that already has at least one round, you will see a Use pairings from last round checkbox above the matches table. Checking it copies the matchups from the previous round into the new round. If you change the players-per-side between rounds (for example Singles to Best Ball), Live Tourney will note that the format converted when applying the previous pairings.
Reusing pairings is only available when the previous round's team size can be mapped onto the new round — that is, when the sizes match or when converting between Singles (1) and a two-player format. For other team-size changes (for example Singles to a 4v4 round), the checkbox is hidden and you build the new round's matchups from scratch.
Match Points
Match scoring is configured via the points editor on the round (Edit Round Information) and on the event. The editor exposes three numeric fields:
| Field | Default |
|---|---|
| Win | 1 |
| Tie | 0.5 |
| Lose | 0 |
You can enter any numeric values — there are no named presets like "Standard" or "Weighted." The same editor also exposes Points per Hole (with options for 1, 3, 6, or 9 holes) and stroke-play points where applicable.
Editing Existing Matches
To adjust a match after it has been created, open Edit Matches & Tees for the round and find the match:
- Swap a player — click the Sub button next to the player's name and pick a replacement (roster search, GHIN or Golf Canada lookup, or manual entry). Handicaps are recalculated and entered scores are preserved. The swap affects that match only; team rosters are unchanged.
- Edit match settings — click Edit Match in the match's action menu. A modal opens with the tee time, starting hole and A / B / C slot on one line, then each team's players with their Playing handicap and the team's bonus points. Click Save Match to apply.
- Delete a match — use Delete Match in the action menu if the match shouldn't exist at all.
Match Times
With a Tee Times start plan, every match is given a tee time stepped by the plan's Interval (minutes) from the round's start time. With a Shotgun plan, matches share the round's start time and are spread across the holes in the plan instead.
Starting Holes
Every match can start on any hole from 1 to 18 — including on 9-hole rounds, where the chosen hole determines which nine the match plays. This applies everywhere a hole is set: the Start Plan when adding matches (in the Add Round wizard or Edit Matches & Tees), the single-match editor, and the round-wide reassign modal. The exception is a course that only has nine holes: with no back nine to play, starting holes stay within 1–9.
Changing one match's starting hole
Click Edit Match in the match's action menu and pick the hole from the Starting hole dropdown, which is grouped into front nine and back nine. For 9-hole rounds, the line under the dropdown shows which nine the selected hole sits on: holes 1–9 play the front nine and holes 10–18 play the back nine. When your change moves the match to the other nine, the line notes that handicaps update on save — Live Tourney rebuilds the scorecard for the new nine (correct hole numbers, stroke indexes, and course handicaps from that nine's rating and slope) while preserving any entered scores. If you typed a manual team handicap in the same edit, the automatic recalculation is skipped so your value is kept.
Reassigning holes across the round
Click Reassign Starting Holes (next to Update All Handicaps) to open a modal listing every match in tee-time order with its current hole, a New Hole selector (1–18), and an A / B / C slot picker for holes with more than one match (A is first off, then B, then C).
The Quick Assign tools fill the whole list at once:
- Assign in Order — gives each match the next hole in sequence starting from the First hole you enter. On 9-hole rounds the sequence wraps within that nine; on 18-hole rounds it wraps 1–18. When there are more matches than holes, the extra passes become B and then C groups on the same holes.
- Flip Nines (9-hole rounds only) — moves every match to the same hole on the other nine (hole 1 becomes 10, hole 12 becomes 3, and so on).
Before you apply, the modal shows how many matches will switch nines — those matches get their handicaps recalculated automatically. If scores have already been entered, a warning explains that a match moved to the other nine keeps its scores by position on the card (a score entered on hole 3 becomes hole 12). Click Apply to save; only matches you changed are updated.
Best Practices
Before the event
- Create all rounds and verify the format on each
- Confirm the handicap allowance and any par adjustments
- Set tee times or shotgun holes
- Communicate the schedule to captains and players
Match day
- Confirm lineups
- Start matches on time
- Enter results promptly so the team total updates live
Flexibility
- Allow for weather delays
- Have backup plans
- Communicate changes quickly
Troubleshooting
| Issue | Solution |
|---|---|
| Wrong format | Edit the round and change the game format |
| Handicap dispute | Verify the handicap allowance on the round |
| Player unavailable | Click the Sub button next to the player in Edit Matches & Tees |
| Match not showing | Confirm the match was saved on the correct round |