Creating a Season
Seasons track player standings across multiple events. This guide covers creating a season and configuring how its standings work.
Seasons were previously called Leagues. Old
livetourney.com/league/...links still work and redirect to the newlivetourney.com/season/...address.
What Is a Season?
A season is a container that links multiple events together so points or scores can accumulate across them. Each linked event still runs as its own event — the season simply rolls up results.
Season or Round Robin?
These two are easy to mix up, but they answer different questions:
| Use a... | When you want... | Examples |
|---|---|---|
| Season | Several events added up into one standings table or points race | A season-long points race, an Order of Merit, "best 8 of 12" weekly events, eclectic (ringer) board |
| Round Robin | One event where players or teams in flights play head-to-head matches against each other | A weekly match play league, a member-guest |
They also work together: run your weekly matches as a Round Robin, then add it (and any other events) to a Season if you want standings across all of them. See Creating a Round Robin.
Creating the Season
- Go to Seasons in the sidebar
- Click Create Season
- Enter a Season Name
- Under Roster Settings, optionally select clubs to scope the roster. Leave this empty for a dynamic roster that includes all clubs.
- Under Tournament Events, select the existing single-round and multi-round events you want included
- Click Create Season
That's the entire creation step. Everything else (custom URL, scoring behavior, flights, password protection, etc.) is configured afterward in the season dashboard.
Season Dashboard Tabs
After creation, the season dashboard has four tabs:
| Tab | Purpose |
|---|---|
| Portal Customization | Design, tabs, and content for the public-facing portal page |
| Schedule & Events | Add or remove events linked to the season |
| Roster Management | Build player rosters (used as divisions) under Player Roster, plus season-defined teams and flights under Team Management |
| Settings | General, Scoring, Access Control, and Quota Tracking settings |
Designing the Season Portal
Every season has a public portal at livetourney.com/season/<code>. A new season's portal works right away: it uses the logo and color from Settings → Branding (Pro accounts), and its header shows the season's date range, how many rounds have been played, and a Next round card that links to the upcoming event. Change either one in Settings → Branding and every season that uses Your brand picks it up.
Open Portal Customization to change it. The editor sits on the left and a live preview on the right. Switch the preview between Desktop and Phone to see each at full scale. Changes show in the preview immediately and go live when you press Save.
Design
| Setting | What it does |
|---|---|
| Header layout | Brand color (logo, season details, and the next round on your color), Course photo (full-width banner photo with the title over it), Split (large logo on your color, photo on the right), or Minimal (white header with a color accent, good for embedding in a club website) |
| Title & logo | Title, subtitle, logo (your account logo, your own, or none), logo size, and an optional white background for dark logos |
| Banner photo | The photo used by the Course photo and Split layouts. Drag it to choose which part shows and switch between Fill and Fit. With the Course photo layout you can also set how much it's darkened behind the title, its height, and the title alignment |
| Header details | Turn the season dates and progress line, or the Next round card, on or off |
| Theme | Your brand, Clubhouse, Links, Desert, Parkland, or Night. Customize colors and fonts fine-tunes the selected theme. Once you edit a color or font, the theme becomes your own and stops following Settings → Branding |
| Navigation | Show sections as tabs (or as one long page) and choose the tab the portal opens on |
The Design tab's sections collapse; open one at a time to edit it. Each shows a one-line summary of its current setting.
Tabs
Drag sections to reorder the portal's tabs, add sections from Add Section, or remove them. The Sponsors section can be its own tab or a Footer strip of sponsor logos under every tab.
How Points Get Into a Season
Points are not configured at the season level. Each linked event computes its own payouts and points using that event's Payouts & Points settings. The season reads those values and sums them across events.
For a multi-round event, everything rolls into one row per player: points awarded on the overall event, points awarded on each individual round, and points from any linked events attached to the event or to one of its rounds (for example, an "Individual Low Net" game running alongside Day 2). The player's expanded event detail shows a line item for each source. A player who appears only in a linked event — not in the multi-round event itself — gets a separate row named after the linked event instead.
If you want standings to update automatically without entering points per event, enable one of the auto-accumulation options under Settings → Scoring Settings (described below).
Top Events Limit ("Best N of M")
To run a "best X of Y rounds" format:
- Go to Settings → Scoring Settings
- Set Top Events Limit to the number of events that should count
- Leave it blank for no limit
The total number of events is determined by however many events you've linked under Schedule & Events. With Top Events Limit set, only each player's best (highest-scoring or lowest-to-par, depending on mode) results count toward their total.
Custom Portal URL
Under Settings → General, you can set a Custom Portal URL slug. Once saved, the season portal is reachable at livetourney.com/season/<your-slug>. The slug must be unique across seasons.
Standings Display Mode
Under Settings → Scoring Settings, the Standings Display Mode select controls how points and payouts appear:
| Option | Behavior |
|---|---|
| Default (All Points/Payouts Only) | Single combined view |
| Gross Only | Standings show gross points and payouts only |
| Net Only | Standings show net points and payouts only |
| Allow Toggle (All / Gross / Net) | Adds a toggle so viewers can switch between All, Gross-only, and Net-only standings |
Ringer (Eclectic) Tab
Ringer (also called eclectic) scoring tracks each player's best score on every hole across the season's single-round events, multi-round events, and round robins, creating a composite "dream round." It lives on the season portal as its own Ringer tab, so a season can show its regular points standings and a ringer board side by side, or run ringer only.
What It Does
For each hole (1-18), the system takes the player's best score from any single-round event, multi-round event round, or round robin round in the season. These best-per-hole scores combine into an 18-hole composite score.
Example: A player shoots hole #1 in 5 on Event 1 and 4 on Event 2. Their ringer score for hole #1 is 4.
Adding the Ringer Tab
- Open your season and go to Portal Customization → Tabs
- Click Add Section and choose Ringer (Eclectic)
- Drag the section to set where the Ringer tab appears in the portal navigation
- Under Content → Ringer, choose the Scoring Display:
| Option | Description |
|---|---|
| Both (Gross and Net) | Show toggle between gross and net scores |
| Gross Only | Display only gross ringer scores |
| Net Only | Display only net ringer scores |
To run a ringer-only season, remove the Standings section from the layout and keep Ringer. To show both, keep both sections enabled.
How It Works
- Single-round events, multi-round events, and round robins are included (brackets and Ryder Cups are excluded)
- Each round robin round and each multi-round event round counts as its own event, so a player's best-per-hole spans every round they played
- For multi-round events, only rounds where players play their own ball count — rounds in team-ball formats (scramble, shamble, alternate shot) are skipped
- Rounds that alternate front and back nines are combined onto a full 18-hole grid
- Scramble events are excluded (no individual scores)
- Players must have completed holes to have ringer scores
- The leaderboard shows each player's composite score to par
- Expanding a player row shows their per-event breakdown
Auto Stableford Accumulation
For seasons using Stableford scoring, you can have standings calculated automatically from event scorecards instead of manually assigning points. Works for both team standings and individual standings.
What It Does
When enabled, the season reads Stableford scores directly from each linked event's scorecards and sums them across events. Standings in your dashboard update as scores are entered during events; the public portal refreshes within about 20 minutes on event days.
- Team standings — points are summed per season team from each event's team Stableford total.
- Individual standings — each player is credited with their own Stableford points, including in events that use a team format (e.g., 4-player team events). Players using a shared scorecard (such as scrambles) all receive the team's Stableford total for that event.
Enabling Auto Stableford
- Go to your season's Settings page
- Find the Auto Stableford Accumulation checkbox under Scoring Settings
- Check the box to enable it
- Save your settings
How It Works
- Only single-round events linked to the season are included
- Events must use a Stableford format for points to be read from scorecards
- Standings show the cumulative Stableford points across all events, with a Gross/Net toggle
- Each event's contribution is visible in the expanded detail view
Auto Score to Par Accumulation
For seasons using stroke play scoring, you can have individual standings calculated automatically by summing each player's to-par scores from event scorecards.
What It Does
When enabled, the season reads gross and net to-par scores directly from each linked event's scorecards and sums them per player. Standings in your dashboard update as scores are entered during events; the public portal refreshes within about 20 minutes on event days. Lower totals rank higher (e.g., -7 beats -4).
Enabling Auto Score to Par
- Go to your season's Settings page
- Find the Auto Score to Par Accumulation checkbox under Scoring Settings
- Check the box to enable it
- Save your settings
Note: This setting is mutually exclusive with Auto Stableford Accumulation. Enabling one will disable the other.
How It Works
- Only single-round events linked to the season are included
- Individual standings show cumulative to-par scores across all events
- Scores display in to-par format (e.g., -2, E, +3)
- Toggle between Gross and Net views using the toggle above the standings
- Each event's to-par contribution is visible in the expanded player detail view
Top Events Limit
When combined with the Top Events Limit setting, only a player's best (lowest) to-par rounds count toward their total. For example, with a limit of 2, only the 2 lowest to-par rounds out of all played events count. Non-counting events appear dimmed in the expanded detail view.
Include Side Games in Standings
By default, side games are kept separate from the main event purse, so skins, deuces, Closest to the Pin, long drive, and custom contest winnings do not flow into season standings. Some organizers want every side game counted toward the season. The Include Side Games in Standings setting handles this without you having to fold side games into each event's main payouts.
What It Does
When enabled, each player's side-game winnings — both dollars and points — are added to their individual standings totals:
- Skins and deuces (gross and net)
- Closest to the Pin, long drive, and any custom contests (dollars and points)
This works even when the main event is a team game but the side game is individual — for example, a team scramble with individual skins credits the skin to the specific player who won it.
It never changes an event's saved payouts. Side-game amounts are calculated live from scorecards each time the standings load.
Enabling It
- Go to your season's Settings page
- Find the Include Side Games in Standings checkbox under Scoring Settings
- Check the box to enable it
- Save your settings
The setting is off by default, so existing seasons are unaffected until you turn it on.
How It Works
- Single-round events and multi-round events are included. For a multi-round event, side games configured on each round count, and each appears in the drill-down labeled with the round name (for example, "Day 1 - Gross Skins"). If the multi-round event uses Aggregate Skins Across Rounds, the single event-wide skins game is counted once instead of per round. Match-play formats (round robin, brackets, Ryder Cup) are not included
- Gross skins and deuces count toward the Gross view, net toward the Net view, and contests (Closest to the Pin, long drive, custom) count toward both views
- A contest prize is counted once in the combined All total
- In a player's expanded event detail, side-game winnings appear as line items directly under each event row (Main Event, Gross Skins, Net Skins, Closest to the Pin, etc.), so anyone can see how the figure was earned without extra clicks. Events where the player won only main-event money show no extra lines.
- Skins and deuces follow each event's Round down to whole dollar payout setting, so the amounts in standings match what the event actually paid
- Side games run on a linked event (for example, net skins on an Individual Low Net game) are counted too, labeled with the linked event's name
- If you applied a side game's purse directly into the event payouts using Update event payouts in the Payouts & Points modal, that money is not counted a second time — it already reaches the standings through the event's payout
Linked Events Combine into One Row
When this setting is on, a linked event's payouts no longer appear as a separate row in a player's event list. Instead they fold into the parent event's row as a line item named after the linked event, so each week of the season reads as one event with its full composition underneath.
Player Roster
The Roster Management → Player Roster tab controls which players appear in the season's individual standings and statistics. The roster lives on the season itself — you build it directly rather than maintaining clubs in your account roster.
- Leave the Player Roster empty for an open roster: every player in the linked events is included.
- Add one or more rosters to restrict and group players. You can populate a roster three ways:
- Add Roster — name it and add players manually (My Roster, Manual entry, or WHS lookup)
- Import from Event — pull the players from a linked event into a roster named after that event
- Add from Club — snapshot the members of a club from your account roster into a roster
- Each player belongs to a single roster. Use multiple rosters as divisions — the individual standings page then shows a dropdown to filter to one division at a time.
Flights and Teams
Season-defined teams (with explicit player membership) and flights are managed in Roster Management → Team Management.
- Flights are free-form text labels you create yourself (e.g., "A Flight", "B Flight"). There are no built-in handicap-range defaults.
- Once flights exist, you can assign season teams to them.
Access Control
Under Settings → Access Control, you can enable Password Protection and set a password. When enabled, visitors must enter the password before viewing the season portal.
Standings Columns
The standings table shows:
| Column | Information |
|---|---|
| Rank | Current position |
| Name | Player or team |
| Events | Number of events played |
| Payout / Points | Total — header changes to To Par when Auto Score-to-Par is on, or Stableford Pts when Auto Stableford is on |
Standings update automatically as events are linked and as scores come in during live events. The public portal caches its Standings, Statistics and Ringer tabs so large seasons load quickly: linking or removing an event refreshes them right away, while score changes show within about 20 minutes on event days and within a day otherwise.
Communicating With Players
Use the Email Players button in the season header to send a message to all players in the season. (Event-level reminders for upcoming events, registration deadlines, etc. are configured in Automations, not at the season level.)
Troubleshooting
| Issue | Solution |
|---|---|
| Missing points | Confirm the event is linked to the season under Schedule & Events, and that the event's own Payouts & Points are configured |
| Wrong standings | Verify the event's payouts/points or, for auto modes, that the event uses the matching scoring format |
| Player not showing | Confirm the player is in one of the season's rosters under Roster Management → Player Roster, or that the Player Roster is empty (open roster) |