Event Management
Last updated November 12, 2026

Hole by Hole Settings

Hole by Hole Settings

Customize individual holes for contests, pin positions, and hole sponsors. This guide covers hole-specific configuration options.

Accessing Hole Settings

  1. Open your event from the dashboard
  2. Click Hole by Hole Settings from the action menu

Interface Overview

The Hole by Hole Settings screen has two tabs:

  • Contests & Sponsors - Set up contests and upload sponsor images
  • Pin Sheet Data - Enter pin position measurements for the leaderboard

Which Holes Are Shown

Both tabs list only the holes your event plays:

  • A 9-hole event on an 18-hole course shows its own nine (holes 1-9 or 10-18).
  • When Play only these holes is on, only the selected holes are listed (for example holes 1-9, 10-18, or a custom set like 3, 7 and 12).
  • Ryder Cup and Round Robin rounds (where the setting is called Play only specific holes) show every hole any match plays. On a 9-hole round, each match plays the selected holes on its own nine, so a selection on one nine can also list the matching holes on the other nine until matches are created.

Settings on holes that aren't shown are kept, not cleared. Turn Play only these holes off and those holes come back with their contests, winners, sponsors and pin data as you left them. Auto Par 3s and Load Sponsors only change the holes that are shown.

Contests & Sponsors Tab

Available Contest Types

Each hole can have these contests enabled:

Contest Description
Closest to the Pin Nearest tee shot to hole
Long Drive Longest drive on the hole
Penalty Shows 0.5 stroke penalty option in scoring
Custom Contest Your own contest (e.g., Longest Putt, Straightest Drive)

Enabling Contests

  1. Find the hole in the table
  2. Click the checkmark icon for Closest to the Pin, Long Drive, or Penalty
  3. For custom contests, click Show Custom Contests and enter a name

Tip: Use the Auto Par 3s button in the Closest to the Pin column header to automatically enable Closest to the Pin on all Par 3 holes. This saves time when setting up contests, especially when switching courses frequently.

Recording Contest Winners

For holes with contests enabled:

  1. Enter the winner's name in the "Contest Winner" field
  2. Click Save
  3. Winner displays on the leaderboard

As you type, a line under the field tells you whether the name will pay out. Payouts (the Add {contest} payout to event payout? checkbox and Export Payouts) credit the winner by matching the name to your roster, so a green Pays Decou + Kahler line means the match was found. Team entries work too: type both players separated by a slash, ampersand, plus or "and" (for example "Jeff Decou / Dana Kahler") and the whole team is credited. A last name plus a matching first initial is enough ("Dave Payne" pays David Payne), and inside a team entry a nickname is accepted when the other player resolves ("Bud Silva / Mark McCullough" pays Mccullough + Silva). A single name whose first name contradicts the roster ("Tom Silva" when the only Silva is Bernard) is not matched, so a guest's name never pays a member who shares the surname. If the name doesn't match anyone, the line reads Not on the roster, so payouts can't match it and offers Use … buttons with the closest roster names; click one to replace what you typed, then Save. The name you save is what the leaderboard shows, so a nickname that matches is fine to keep.

If a contest is optional for your field, mark players in or out using the Hole Contests column in the Skins, Deuces, and Putts participation table. Players marked out cannot enter Closest to the Pin distances on their scorecard.

Contest Scoring Mode

A Contest scoring toggle appears above the hole table once the event has at least one contest hole, with up to three options:

Option Behavior
Field-wide One winner across the entire field on every contest hole.
Per-flight Each flight has its own winner and purse on every Closest to the Pin and Long Drive hole. Requires flights on the event.
Per player group Each group of players you define has its own winner and purse on every Closest to the Pin and Long Drive hole, regardless of which team the players are on.

The toggle is event-wide — switching modes applies to every contest hole at once. When per-flight or per player group scoring is active:

  • The Contest Winner cell for each Closest to the Pin and Long Drive hole expands to show one input per flight or group, stacked with its label.
  • Enter a winner for each flight or group and click Save on the row for that flight or group.
  • Pills under each Closest to the Pin checkbox let you exclude a flight or group from that hole, so the Men's Closest to the Pin can be on 7 and the Women's on 16.
  • Players entering Closest to the Pin distances on the scorecard contribute to their own flight's or group's leaderboard only.

Per-flight contest scoring is available for single round events, multi-round event rounds, and Round Robin rounds. Multi-round rounds use the flights defined on the multi-round event, and Round Robin rounds use the Round Robin's flights. The Per-flight option is disabled when the event has no flights. Per player group scoring is available for single round events and multi-round event rounds. The toggle is hidden for Ryder Cup events. Custom contests continue to use a single field-wide winner in every mode.

Player Groups

Per player group scoring is for events whose flights don't line up with the contests — most often a team event (a scramble or shamble with mixed teams) that wants separate Men's and Women's Closest to the Pin and Long Drive. Groups can be anything: a gender, a tee, a handicap range, a division.

When you select Per player group, a Player groups panel opens under the toggle. If the event has flights, the groups start out with the same names as the flights so any winners already recorded per flight carry over; rename or remove them as needed.

  1. Type a group name (for example "Men") and click Add. Repeat for each group.
  2. Click Select players on a group to open the Select Players picker. Choose players by All, Gender, Handicap Range, Flight, the Tee they play, or a roster custom field, then click Select. Nothing is assigned automatically; the picker only selects, you decide the group.
  3. Expand a group to see its players. Click the × on a player to remove them from the group. Clear empties the group, the pencil renames it (recorded winners and purses follow the new name), and the trash can removes it.
  4. The Unassigned section lists every player not yet in a group. Use the Add to... dropdown on a player to place them directly.

Players without a group don't see the Closest to the Pin distance entry on per-group holes. On a card with several players (a scramble), the scorer gets one distance entry per group represented on the card, limited to that group's players.

Switching between Per-flight and Per player group keeps any recorded winner or hole restriction whose flight name matches a group name (for example a "Men" flight and a "Men" group) and clears the rest.

Contests for Linked Events

Linked events can have their own contests, fully independent from the main event's. This is useful when a linked event (for example, a separate division or format played off the same scorecards) should have its own closest to the pin, long drive, or custom contests and winners.

To set them up:

  1. Find the linked event on your dashboard event card
  2. Open its action menu (the ··· button on the linked event row)
  3. Click Hole by Hole Settings

A banner at the top confirms you're editing contests for that linked event. In this mode:

  • You can enable Closest to the Pin, Long Drive, and Custom Contest on each hole and record winners, exactly like the main event.
  • Per-flight contest scoring is supported using the linked event's own flights.
  • The Pin Sheet Data tab, the Penalty column, and the Hole Sponsor column are hidden — pin positions, penalties, and sponsor images are shared with the main event and are edited from the main event's Hole by Hole Settings.

A linked event's contests and winners are completely separate from the main event's. They appear in the Contest Results tab once a winner is recorded (the round selector lists each round and linked event that has results), and can be shown on the TV display by choosing the linked event in a Contest Results slide's settings.

Hole Sponsors

Upload sponsor images for individual holes:

  1. Click the upload area in the "Hole Sponsor" column
  2. Select an image (PNG or JPG, max 2MB)
  3. Image displays in the scoring view when players reach that hole, and on Horse Race leaderboards

To remove a sponsor image, hover over it and click the delete button.

Using the Event's Sponsors

When the event has sponsors in its sponsor library (added by an outing coordinator in the outing portal, or by you in the Sponsors card of the event settings), each hole's sponsor slot shows a From this event's sponsors row of logos above the upload area. Hover a logo to see the sponsor's name, and click it to make it that hole's sponsor. A small gold dot marks a sponsor who asked for that hole. For multi-round, Round Robin, and Ryder Cup events, the library lives on the main event, so every round sees the same sponsors.

Apply Requested Holes appears in the tab header when at least one sponsor asked for a specific hole. It puts each of those sponsors on the hole they asked for:

  • Empty holes are filled straight away.
  • If any requested hole already has a different sponsor image, a Replace Hole Sponsors? dialog lists them with the current and requested logos. Choose Fill Empty Holes Only to leave them as they are, or Replace Them to put the requested sponsors there.
  • If two sponsors asked for the same hole, the one listed first in the sponsor library gets it.
  • Requests for holes this event doesn't play (for example hole 3 on a back-nine event) are skipped.

When a sponsor asked to be the title sponsor, a banner at the top of the tab shows them and whether they're already the event's sponsor image. Click Use as Event Sponsor Image to make them the sponsor image shown on the leaderboard and TV; if the event already has a different sponsor image, you'll be asked to confirm the replacement.

Saving and Loading Sponsor Sets

If you use the same sponsors across multiple events, you can save them as a reusable set and load them into future events with one click.

Saving sponsors:

  1. Upload sponsor images to the holes you want
  2. Click Save Sponsors in the tab header
  3. Enter a name (e.g., "2026 Spring Sponsors") and click Save Template
  4. Only holes with images are included in the saved set

Loading sponsors:

  1. Click Load Sponsors in the tab header
  2. Browse your saved sponsor sets with thumbnail previews
  3. Click Apply to load the sponsor images onto the current event
  4. Sponsor images are matched by hole number, and only the holes shown on the screen get one (holes your event doesn't play are skipped)

Deleting a saved set:

  1. Click Load Sponsors to open the list
  2. Click Delete next to the set you want to remove

Pin Sheet Data Tab

Pin sheet data helps players and shows pin positions on the leaderboard display.

Pin Position Fields

Field Description
Green Depth Total depth of the green in yards
Pin Front Yards onto the green from its front-most point — the same front-to-back axis as Green Depth, so a Pin Front of 19 on a 23-yard green sits 4 yards inside the back edge
Pin Left Yards in from the green's left edge at that depth (if pin is left of center)
Pin Right Yards in from the green's right edge at that depth (if pin is right of center)

Entering Pin Data

  1. Switch to the Pin Sheet Data tab
  2. Enter measurements for each hole
  3. The visual pin position indicator updates automatically

Pin Position Display

The system displays a visual representation of the pin position based on your measurements. This appears on:

  • TV leaderboard displays
  • Detailed hole information

On courses with green maps, the pin dot is placed against the green's actual shape — the front measurement is walked on from the green's front-most point along the depth axis, then the left/right measurement comes in from where the green's edge sits at that depth — so the dot always lands on the putting surface, matching how Pin Front and Green Depth read together on a printed pin sheet.

Pin sheets also show the pin's distance from the center of the green, calculated from your Green Depth and Pin Front entries: +2 means 2 yards past center, -3 means 3 yards short of center.

Hole Information Display

Each hole row shows:

  • Hole number
  • Par (from course data)
  • Length (from course data)
  • HCP (handicap ranking)

Common Configurations

Standard Tournament

  • Closest to the Pin enabled on Par 3 holes
  • Long Drive on one Par 4 or Par 5
  • Pin positions set for all 18

Charity Outing

  • Multiple Closest to the Pin contests with sponsors
  • Long Drive for men and women
  • Custom contests for special prizes

Member Event

  • Single Closest to the Pin contest
  • Sponsor images for hole sponsors
  • Pin sheet data for TV display

Best Practices

  1. Set contests before the event - Players should know which holes have contests
  2. Get pin positions from the pro shop - Ensure accuracy
  3. Upload sponsor images in advance - Test that they display correctly
  4. Record winners promptly - Update as groups finish

Next Steps

Was this article helpful?

© 2026 Live Tourney. All rights reserved.