Editing Pairings and Handicaps
Pairings determine who plays together and when. This guide covers creating groups, assigning tee times, and managing player handicaps.
Accessing Pairings
- Open your event from the dashboard
- Click Edit Pairings and Handicaps from the action menu
Understanding Pairings
A pairing is a group of players who play together. Each pairing has:
- Players (typically 3-4)
- Starting time
- Starting hole (for shotgun)
Creating Pairings
Pairings are built manually in the editor. Use Add Group + in the toolbar to create a new group, then drag players or teams into it. Groups can hold any number of players (typically 3-4) — size them by adding or removing players via drag-and-drop.
To build a group without hunting through the unassigned cards, type names into the Search to select players for a group box above the pool. Picking a name ticks that player's card (pick it again to untick), so you can select a whole group by name and then press Add Group + once. Multi-player teams are listed under their team name.
Move Teams Together (Best Ball Events)
For best ball events, individual players appear as separate cards in the pairings editor — so dragging one player normally leaves their teammates behind. To move every member of a best ball team in a single drag, switch on Move teams together in the pairings toolbar.
While dragging, the dragged card shows a "+N teammate(s)" badge and the remaining teammates in the source group are outlined with a dashed border and a "moving with team" pill, so you can confirm which players will travel together before you drop.
The toggle is hidden for split-format events (6-6-6, 9-9), where team numbers are intentionally reused across unrelated segments.
Reverse Shotgun Order (Shotgun Events)
For shotgun starts, the pairings editor normally lists groups by starting hole in ascending order (1, 1B, 2, 2B, … 18). If your event is run as a reverse shotgun — announced as hole 1 first, then 18 down to 2 — switch on Reverse shotgun order in the pairings toolbar. The list then reads 1, 1B, 18, 18B, 17, 17B, and so on down to 2, matching the order players are sent out.
The switch appears only when the event is a shotgun start (or its groups start on more than one hole). The setting is saved on the event, so everyone editing the pairings sees the same order, and it applies in both the Standard and Tee Sheet views as well as the Move To group list. It only changes how groups are listed; it does not change any group's starting hole, A/B position, or tee time.
Swapping Two Players Between Groups
When you want two players in different groups to trade places, you can swap them directly instead of dragging — which avoids having to remember which player goes where.
- Click (or tap) a player to select them. A bar appears at the bottom of the screen reading "{name} selected — pick a player in another group to swap."
- Click a player in a different group. The bar updates to show "Swap {player A} ↔ {player B}" with a Swap button.
- Click Swap to trade the two players' spots. Use the × on the bar to cancel, and clicking a selected player again deselects it.
Swapping only changes which tee-time group each player is in — it does not change team membership. Handicaps are left unchanged unless the swap moves a player between the front and back nine of a 9-hole (per-group nine) event, in which case the affected player's handicap recalculates for their new nine, just as it does when dragging.
Swap works in both the Standard and Tee Sheet views and is available for individual, best ball, and scramble formats. It is disabled for split-format events (6-6-6, 9-9).
Moving Entire Groups (Swap or Slot In)
You can also drag a whole group — not just individual players — using the grip handle on the left edge of each group row. This works in both the Standard and Tee Sheet views on desktop, and for every format including split formats. There are two gestures:
- Drop onto another group to swap. Drag a group's handle and drop it directly on top of another group (the target highlights green). The two groups trade their start assignments — tee time, starting hole, and shotgun A/B/C position.
- Drop between two groups to slot in. Drag a group and drop it in the gap between two others. The dragged group takes that position's start time, and the groups between the old and new positions each shift one slot to fill the gap. Your schedule's overall set of times and holes stays exactly as it was — groups just rotate through it. Groups outside the affected range are untouched.
For example, with groups at 8:00, 8:08, 8:16, and 8:24, dragging the 8:24 group between 8:00 and 8:08 gives it 8:08, moves the old 8:08 group to 8:16, and the old 8:16 group to 8:24.
Moving a group never changes who is in it — players, teams, and scorecard codes stay put; only the start assignments move. If a move takes a group across the front/back boundary in a 9-hole (per-group nine) event, scores renumber and handicaps recalculate for the new nine automatically, just as they do in Reassign Tee Times.
Events Played Across Multiple Courses
When the groups in an event are on more than one course — for example a 27-hole facility whose nines are saved as separate 18-hole routings — the pairings editor groups them by course. Each course gets a header showing its name and its group and player counts, and groups that start at the same time are listed course by course, then by hole. This applies to the Standard view, the Tee Sheet view, and the mobile list. A group's course comes from the tees its players are on.
Moving players or groups between courses changes the course they play:
- Moving a player or team (by dragging, with the Move To menu, or with Swap) into a group on another course puts them on that course. In a swap, each player takes on the course of the group they move into.
- Dragging a whole group onto a group on another course swaps the two groups' starts and their courses. Dropping it between groups in another course's section slots it in there; the groups in between each shift one slot, so a group at the edge of a section can move to the neighboring course as well.
The move is saved first, then the affected players' tees are updated for the new course, which recalculates their course handicaps and the pars and stroke indexes on their scorecards. A confirmation reading "Now playing {course} — tees and handicaps updated" appears when that finishes. Players keep the same tee (name and gender) on the new course when that course has one.
Two things to know:
- An empty group has no course of its own, so it is listed under the event's main course, and moving players into an empty group leaves their tees as they are.
- To change a group's course without moving it, use Edit Tees.
Tee Time Assignment
Setting Tee Times in Bulk
To set a first tee time and interval that auto-computes times for every group, use the Reassign Tee Times modal (see below). It accepts a first tee time + interval (in minutes) and applies the resulting times to all groups at once.
Adjusting an Individual Group's Time
Editing one group's tee time changes only that group — other groups are not shifted automatically. If you need to recalculate every group's time, use Reassign Tee Times instead.
Shotgun Starts
Whether an event uses shotgun start is set during event creation. To switch an existing event between tee times and shotgun start, use the Reassign Tee Times tool described below.
Reassigning Tee Times
If you need to switch your event from tee times to shotgun start (or vice versa) after pairings have been created, use the Reassign Tee Times tool instead of manually editing each group. The button is disabled until at least one group exists.
- Open the pairings editor for your event
- Click Reassign Tee Times in the toolbar (next to "Add Group +")
- Choose your target format: Tee Times or Shotgun Start
- Configure the settings:
- Tee Times: Set the first tee time, interval between groups, and choose Standard or Split Start mode
- Shotgun Start: Set the start time and optionally customize how many groups start on each hole
- Review the preview showing each group's new assignment
- Click Apply Changes to update all groups at once
Customizing Shotgun Hole Distribution
When switching to shotgun, you can control which holes have multiple groups:
- Expand Customize Groups Per Hole to see per-hole controls
- Use +/- buttons to set 0-3 groups per hole
- Click Auto Distribute to evenly spread groups across holes
- Use Set all to buttons for quick bulk changes
All changes are applied atomically, so either all groups update or none do.
Flip Nines
For 18-hole and 9-hole events, a Flip Nines quick action appears in the Reassign Tee Times modal. On a 9-hole event, each group plays the nine its starting hole sits on (holes 1–9 play the front nine, holes 10–18 the back nine), so this is also how you switch a 9-hole event from the front nine to the back nine. This swaps every group's starting hole between the front and back nine in one click:
- Hole 1 becomes Hole 10, Hole 2 becomes Hole 11, and so on
- Hole 10 becomes Hole 1, Hole 11 becomes Hole 2, and so on
- Starting times, B/C group flags, and all other settings remain unchanged
- For 9-hole events, handicaps are automatically recalculated using the correct course rating for each group's new nine
This is useful when you need to reverse which nine each group starts on without reconfiguring the entire tee sheet.
Re-Pairing Groups (Group Order)
Whenever an event has more than one group, the Reassign Tee Times modal includes a Group Order selector that re-pairs the groups as part of the reassignment.
Options available for every event:
- Keep current group order (default) — groups keep their teams; only times and holes are reassigned
- Handicap: Low → High or High → Low — sorts teams by their current handicap; Low → High sends the low handicaps out first, High → Low sends them out last
Rounds that belong to a multi-round event get additional options that re-pair the round based on combined results from the event's other rounds — useful when a later round already exists and you want leaders going out last (or first) without deleting and recreating the round:
- Gross Scores: Low → High or High → Low — Low → High sends the leaders out first; High → Low sends them out last
- Net Scores: Low → High or High → Low
- Flights: First → Last or Last → First — appears when the parent event has flights; a Within Each Flight selector chooses the gross or net score order applied inside each flight
When any order other than "Keep current group order" is selected, teams are re-dealt into the existing groups in sorted order. Group count, sizes, tee times, and starting holes stay the same — only which teams occupy each group changes. Teams keep their scores when they move, and teams with no results from the other rounds (or no handicap) are placed last. The preview lists which teams land in each group before you apply.
When sorting by flights, a Keep flights in separate groups option prevents mixing flights in one group: if a flight does not fill its last group, that group goes out short and the next flight starts in the next group. If there are not enough groups to keep every flight separate, the remaining teams are placed into the open seats and a warning shows how many had to share a group with another flight.
For 18-hole events, Reassign Tee Times exposes a Tee Time Mode selector with Standard and Split Start options. With Split Start, groups alternate between Hole 1 and Hole 10 at each tee-time slot, so half the field starts on the front nine and half on the back at the same time.
This option only appears when the new format is Tee Times and the event has 18 holes.
Handicap Management
Viewing Handicaps
There are two views in the pairings editor, toggled in the top-right of the page:
- Standard — shows handicaps inline on each player card.
- Tee Sheet — a table view. Use the Show Details... dropdown to add columns including Course, Tee, Player Handicap, Flight, and GHIN. If your roster has custom fields, your event has its own event fields (for example, unmatched spreadsheet columns you kept during an import), or your event has registration questions, those appear as additional options grouped under Roster Custom Fields, Event Fields, and Registration Questions.
Updating Handicaps
Individual Update
- Click on player
- Edit handicap index
- Course handicap recalculates
You can also set a player's full course handicap separately from their playing handicap by typing both values with a slash — for example 14/13 stores 14 as the full (100%) course handicap and 13 as the playing handicap. The full value is what the Show Slash Handicaps scorecard option prints on the left of the slash. Typing a single number sets both to that value.
Allowance percentage, max handicap, and max handicap differential between teammates are configured in the event/round settings, not in the pairings editor.
Scheduling a Refresh for a Future Date
If you want handicaps to be pulled automatically on the morning of your event, expand Advanced Options in the pairings editor and pick a Revision Date in the future. The action button changes to Schedule refresh for {date}.
After scheduling, an amber Refresh scheduled banner appears with the scheduled date, the timezone the schedule is anchored to (your browser's timezone at the time you scheduled), and a Cancel link.
On the scheduled day, the system pulls updated handicaps automatically at around 4 AM in that timezone. Scorecards that already have scores entered are preserved — only unscored cards get the new handicaps. The event organizer receives a summary email afterward listing each player's previous and new index.
To cancel a pending refresh, click Cancel in the banner. To change the date, cancel and pick a new one.
Play Off the Low Handicap
For Net events, you can set the lowest handicap in the field to play to scratch and allocate everyone else off that. This is useful when the field includes plus handicaps — rather than having those players give strokes back, the low player plays at 0 and every other handicap is increased by the same amount.
To turn it on, expand Advanced Options in the pairings editor and switch on Play Off the Low Handicap. The lowest rounded playing handicap in the field becomes 0, and every other player's handicap shifts up by that amount. Switching it off restores the standard handicaps.
The field adjusts automatically when you add or remove players or teams, so the lowest handicap always plays to scratch. The adjustment also appears as a final step in the Handicap Explained breakdown, where the shift from the standard handicap to the adjusted one is shown.
On multi-round events, the setting applies per round — turn it on in the pairings editor for each round where you want the field to play off the low handicap. Each round computes its own adjustment from that round's field.
Course Handicap Calculation
Course handicap is calculated from:
- Handicap index
- Course slope
- Course rating
- Tee being played
Handicap Rounding
To change how computed handicaps are rounded after your event is set up:
- Open your event and click Edit Pairings and Handicaps from the action menu
- Expand the Advanced Options section, then find Handicap Rounding inside it
- Choose an option from the Rounding Method dropdown
- Click Round Handicaps to apply it — handicaps recalculate and the new rounding appears on scorecards and reports
The Rounding Method dropdown offers:
- Nearest Whole Number (the default)
- Nearest Half Stroke
- Nearest Tenth of A Stroke
- Nearest Hundredth of A Stroke
- Up To Whole Number, Up To Half Stroke, Up to Tenth of a Stroke
- Down To Whole Number, Down To Half Stroke, Down To Tenth of a Stroke
The same Rounding Method control also appears inside the Quota Adjustment settings in the pairings editor, so quota-based events can set rounding alongside their adjustment options.
For quota events, the rounding method is applied to the player's quota, and their event handicap is derived from it: handicap = (holes × 2) − quota. The league keeps the exact unrounded value (for example 14.5) for week-to-week adjustments, while the event's leaderboard, scorecards, and printed reports all show the rounded quota — so a raw quota of 14.5 rounds up to 15 and plays and displays as 15 everywhere.
Removing Players from a Single Round (Multi-Round Events)
On rounds of a multi-round event, you can take players — or entire groups — off one round's tee sheet without removing them from the event. This is for players who are skipping a round: they stay in the event and in every other round, and you can add them back to this round's tee sheet at any time.
Removing a Player or Team
- Standard view (desktop): click the × next to a player's "Move To" dropdown.
- Mobile view: tap Remove from this round on the player's card (split-format events show the button on each team block).
A confirmation window lists who is being removed and explains that they stay in the event. If any of the affected scorecards already have scores, a warning notes that the scores are kept with the removed card and come back if you re-add the player — but they won't count on the leaderboard while removed.
Removing a Whole Group
- Tee Sheet view: click the red Remove button in the group row's actions area.
- Standard view: click Remove Group in the group's Code column.
- Mobile view: tap Remove Group from Round at the bottom of the group card.
Removing a group takes every player in it off this round's tee sheet and deletes the group (the tee-time slot). The players all appear in the Not playing this round list.
Adding Players Back
Once anyone has been removed, a Not playing this round panel appears above the tee sheet showing each removed player (or team) with their handicap. To put someone back on the tee sheet, pick a group from their Add to group… dropdown — they're restored to that group with their original handicap, tees, and any scores intact. Choose + New group instead to create a fresh group (using the time and starting hole set in the Add Group panel) and restore them into it.
It's fine to remove every group from a round. The round keeps its full action menu, Edit Pairings shows a "No groups on this round yet" notice, and you can rebuild the tee sheet with + New group or Add Group +.
If restoring a player into a group on the other nine of a 9-hole (per-group nine) event, their scores renumber and handicap recalculates for the new nine automatically, just like a drag move.
These controls only appear on rounds of a multi-round event. To remove a player from the entire event, use Edit Teams and Players instead.
Making Changes on Event Day
Last-Minute Adjustments
Common day-of changes:
| Situation | Action |
|---|---|
| No-show | Remove from group |
| Late arrival | Move to later group |
| Want to play together | Swap between groups |
Reorganizing Groups
- Drag players between groups, or use the Swap flow to trade two players in different groups (see "Swapping Two Players Between Groups" above)
- Groups resize automatically
- Tee times adjust if needed
Printing Pairings
Tee Sheet
Generate a printable tee sheet:
- Go to Print Scorecards and Reports
- Add the Tee Sheet element
- Print or download PDF
The Tee Sheet element shows each group's players, tee time, and starting hole for both tee-time and shotgun events.
Common Issues
Duplicate Players
If the same player ends up in more than one group, an amber Duplicate players on the tee sheet banner appears at the top of the pairings editor naming the affected players. Duplicates matter because scores could be entered against the wrong card.
To fix it:
- Click Review & Fix in the banner to open the Fix Duplicate Players window
- Each duplicated player is listed with every group they appear in — the tee time, starting hole, and who else is in that group
- Click Keep This One next to the spot the player should stay in
The other copies are removed from the tee sheet in one step. This only cleans up the pairings — the player is not removed from the event.
Uneven Groups
When players don't divide evenly:
- Accept one smaller group
- Add placeholder for potential late add
- Combine two small groups
Player Conflicts
If players shouldn't be grouped together:
- Move one to different group
- Note the conflict for future events
Wrong Handicap
If handicap appears incorrect:
- Verify against GHIN or Golf Canada
- Manually correct if needed
- Document the issue
Best Practices
- Finalize pairings early - Give players time to plan
- Communicate clearly - Send tee times promptly
- Build in buffer - Leave flexibility for changes
- Keep records - Screenshot pairings before event